Sparkle Power Supply SPI500U4BG-B204-R2 500W ATX 1U FAN SATA APFC 80+G Brown Box
Sparkle Power Supply SPI500U4BG-B204-R2 500W ATX 1U FAN SATA APFC 80+G Brown Box
SPI500U4BG
(80PLUS Gold, RoHS Compliant)
500 Watts ATX 12V, 1U
Switching Power Supply
Features
• Complied with ATX12V standard
• Active Power Factor Correction (PFC) meet EN61000-3-2
• High efficiency and reliability
• Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
.
• Remote ON/OFF function
• Internal 12V DC fan included
• Low noise and ripple
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
• Approved by : UL/CUL60950-1 2nd TUV EN60950-1 2nd, CB 60950-1 2nd , FCC, EMC
Specification
Temperature Range: Operating: 0oC - +50oC on full load storage and shipping: -20oC - +80oC
Humidity: 85% on operating, 95% on storage
Dielectric Withstand: Primary frame ground 1800V AC for 2 second
Efficiency: Typical > 90%
Rise time: Less than 20ms
Hold-up Time: 16 ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 - 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25oC
Input Characteristics
Input Range: 90 - 264Vac, Full Range Input
Frequency: 47 - 63Hz
Input Current: Max 8A at 115Vac, 4.0A at 230Vac
Inrush Current: No Damage
Output Characteristics
Output Voltage, Minimum Load, Normal Load, Maximum Load, Load Reg., Ripple and Noise
+3.3V, - 0.1A, 10A, 20A, +/- 5%, 50mV P-P
+5V, 0.1A, 10A, 20A, +/-5%, 50mV P-P
+12V1, 0.5A, 8A, 16A, +/- 5%, 120mV P-P
+12V2, 0.5A, 8A, 16A, +/- 5%, 120mV P-P
+12V3, 0.5A, 8A, 16A, +/- 5%, 120mV P-P
-12V, 0A, 0.25A, 0.5A, +/- 10%, 120mV P-P
+5Vsb, 0A, 1.75A, 3.5A, +/- 5%, 50mV P-P
SPI500U4BG
(80PLUS Gold, RoHS Compliant)
500 Watts ATX 12V, 1U
Switching Power Supply
Features
• Complied with ATX12V standard
• Active Power Factor Correction (PFC) meet EN61000-3-2
• High efficiency and reliability
• Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances)
.
• Remote ON/OFF function
• Internal 12V DC fan included
• Low noise and ripple
• Output over voltage, short circuit, and over current protection
• 100% Hi-pot, ATE, and burn-in tested
• Re-settable power shut down
• Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
• Approved by : UL/CUL60950-1 2nd TUV EN60950-1 2nd, CB 60950-1 2nd , FCC, EMC
Specification
Temperature Range: Operating: 0oC - +50oC on full load storage and shipping: -20oC - +80oC
Humidity: 85% on operating, 95% on storage
Dielectric Withstand: Primary frame ground 1800V AC for 2 second
Efficiency: Typical > 90%
Rise time: Less than 20ms
Hold-up Time: 16 ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 - 500ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA at 264Vac, 50Hz
MTBF: 100,000 hours on maximum load at +25oC
Input Characteristics
Input Range: 90 - 264Vac, Full Range Input
Frequency: 47 - 63Hz
Input Current: Max 8A at 115Vac, 4.0A at 230Vac
Inrush Current: No Damage
Output Characteristics
Output Voltage, Minimum Load, Normal Load, Maximum Load, Load Reg., Ripple and Noise
+3.3V, - 0.1A, 10A, 20A, +/- 5%, 50mV P-P
+5V, 0.1A, 10A, 20A, +/-5%, 50mV P-P
+12V1, 0.5A, 8A, 16A, +/- 5%, 120mV P-P
+12V2, 0.5A, 8A, 16A, +/- 5%, 120mV P-P
+12V3, 0.5A, 8A, 16A, +/- 5%, 120mV P-P
-12V, 0A, 0.25A, 0.5A, +/- 10%, 120mV P-P
+5Vsb, 0A, 1.75A, 3.5A, +/- 5%, 50mV P-P
