Supermicro System SG-2028R-NR48N 2U Xeon E5-2600 v4+-v3 S2011 3TB DDR4 48x2.5Hot-swap Brown Box
Supermicro System SG-2028R-NR48N 2U Xeon E5-2600 v4+/v3 S2011 3TB DDR4 48x2.5""Hot-swap Brown Box
1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 3TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 24 DIMM slots
3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8
4. SIOM for flexible networking options
5. 48 Hot-swap 2.5" NVMe drive bays; 2 rear Hot-swap 2.5" SATA drive bays
6. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
7. 5 Hot-swap 8cm redundant PWM fans
8. 1600W Redundant Power Supplies Titanium Level (96%)
Motherboard
Super X10DSC+
Processor/Cache
CPU:Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache:Up to 22 Cores / Up to 55MB Cache
System Bus:QPI up to 9.6 GT/s
Note: BIOS version 2.0 or above is required
Note: Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity:24x 288-pin DDR4 DIMM slots
Up to 3TB ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type:2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage:1.2 V
Error Detection:Corrects single-bit errors
Input / Output
LAN:LAN ports via SIOM Add-On-Card
USB:3 USB 3.0 ports (2 rear + 1 Type A)
Video:1 VGA port
Serial Port / Header:1 Fast UART 16550 port / 1 Header
Chassis
Form Factor:2U Rackmount
Model:CSE-226STS-R1K62P1
Dimensions
Width:17.2" (437mm)
Height:3.5" (89mm)
Depth:30.2" (767mm)
With Cable Management Arm Installed:35.2" (895mm)
Available Colors:Black
Front Panel
Buttons:Power On/Off button
System Reset button
LEDs:Power status LED
Hard drive activity LED
2 Network activity LEDs
System Overheat LED
Power fail LED
Expansion Slots
PCI-Express:2 PCI-E 3.0 x16 slots
1 PCI-E 3.0 x8 slots
Slot 3 Occupied by NVMe AOC
Drive Bays
Hot-swap:48 Hot-swap 2.5" NVMe drive bays
2 rear Hot-swap 2.5" SATA drive bays
Backplane
Two 24 port NVMe backplanes, each supporting up to 24x 2.5" NVMe SSDs
System Cooling
Fans:5 hot-swap 8cm redundant PWM cooling fans
Power Supply
1600W Redundant Power Supplies with PMBus
Total Output Power:1000W/1600W
Dimension(W x H x L):73.5 x 40 x 203 mm
Input:100-127Vac / 13 - 9A / 50-60Hz
200-240Vac / 10 - 8A / 50-60Hz
+12V:Max: 83.3A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)
12Vsb:Max: 2.1A / Min: 0A
Output Type:25 Pairs Gold Finger Connector
Certification: UL/cUL/CB/BSMI/CE/CCC
Titanium Level
System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Operating Environment / Compliance
RoHS:RoHS Compliant
Environmental Spec.:Operating Temperature: 10oC to 35oC (50oF to 95oF)
Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension (L inchxW inchxH inch)
NA
Weight
80.00lb
Warranty Information
1 Year
1. Dual socket R3 (LGA 2011) supports Intel® Xeon® processor E5-2600 v4†/ v3 family; QPI up to 9.6GT/s
2. Up to 3TB† ECC 3DS LRDIMM , up to DDR4- 2400†MHz ; 24 DIMM slots
3. 2 PCI-E 3.0 x16, 1 PCI-E 3.0 x8
4. SIOM for flexible networking options
5. 48 Hot-swap 2.5" NVMe drive bays; 2 rear Hot-swap 2.5" SATA drive bays
6. Server remote management: IPMI 2.0 / KVM over LAN / Media over LAN
7. 5 Hot-swap 8cm redundant PWM fans
8. 1600W Redundant Power Supplies Titanium Level (96%)
Motherboard
Super X10DSC+
Processor/Cache
CPU:Intel Xeon processor E5-2600 v4/ v3 family (up to 145W TDP)
Dual Socket R3 (LGA 2011)
Cores / Cache:Up to 22 Cores / Up to 55MB Cache
System Bus:QPI up to 9.6 GT/s
Note: BIOS version 2.0 or above is required
Note: Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization.
System Memory
Memory Capacity:24x 288-pin DDR4 DIMM slots
Up to 3TB ECC 3DS LRDIMM, 768GB ECC RDIMM
Memory Type:2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit
DIMM Sizes:RDIMM: 32GB, 16GB, 8GB, 4GB
LRDIMM: 64GB, 32GB
3DS LRDIMM: 128GB
Memory Voltage:1.2 V
Error Detection:Corrects single-bit errors
Input / Output
LAN:LAN ports via SIOM Add-On-Card
USB:3 USB 3.0 ports (2 rear + 1 Type A)
Video:1 VGA port
Serial Port / Header:1 Fast UART 16550 port / 1 Header
Chassis
Form Factor:2U Rackmount
Model:CSE-226STS-R1K62P1
Dimensions
Width:17.2" (437mm)
Height:3.5" (89mm)
Depth:30.2" (767mm)
With Cable Management Arm Installed:35.2" (895mm)
Available Colors:Black
Front Panel
Buttons:Power On/Off button
System Reset button
LEDs:Power status LED
Hard drive activity LED
2 Network activity LEDs
System Overheat LED
Power fail LED
Expansion Slots
PCI-Express:2 PCI-E 3.0 x16 slots
1 PCI-E 3.0 x8 slots
Slot 3 Occupied by NVMe AOC
Drive Bays
Hot-swap:48 Hot-swap 2.5" NVMe drive bays
2 rear Hot-swap 2.5" SATA drive bays
Backplane
Two 24 port NVMe backplanes, each supporting up to 24x 2.5" NVMe SSDs
System Cooling
Fans:5 hot-swap 8cm redundant PWM cooling fans
Power Supply
1600W Redundant Power Supplies with PMBus
Total Output Power:1000W/1600W
Dimension(W x H x L):73.5 x 40 x 203 mm
Input:100-127Vac / 13 - 9A / 50-60Hz
200-240Vac / 10 - 8A / 50-60Hz
+12V:Max: 83.3A / Min: 0A (100-127Vac)
Max: 133A / Min: 0A (200-240Vac)
12Vsb:Max: 2.1A / Min: 0A
Output Type:25 Pairs Gold Finger Connector
Certification: UL/cUL/CB/BSMI/CE/CCC
Titanium Level
System BIOS
BIOS Type:128Mb SPI Flash EEPROM with AMI BIOS
BIOS Features:Plug and Play (PnP)
APM 1.2
PCI 2.2
ACPI 1.0 / 2.0
USB Keyboard support
SMBIOS 2.3
UEFI
Operating Environment / Compliance
RoHS:RoHS Compliant
Environmental Spec.:Operating Temperature: 10oC to 35oC (50oF to 95oF)
Non-operating Temperature: -40oC to 70oC (-40oF to 158oF)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5% to 95% (non-condensing)
Item Dimension (L inchxW inchxH inch)
NA
Weight
80.00lb
Warranty Information
1 Year
