DJI Drone Accessory CP.WK.000046 A3 Flight Controller Retail
DJI Drone Accessory CP.WK.000046 A3 Flight Controller Retail
Combining ultimate reliability with accurate flight control, the brand-new A3 series of flight controllers is ideal for demanding industrial and cinematic applications where reliability and customization are essential.
Triple Modular Redundancy
The A3 Pro is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure during flight, it seamlessly switches to another unit to maintain reliability and precision.
(Upgrade the A3 to A3 Pro by installing 2 upgrade kits.)
Precision Fault-Tolerant Control
The new attitude determination and multi-sensor fusion algorithms improve the A3s control accuracy. The robust control algorithm enables the A3 and A3 Pro to be adapted to a wide range of aircraft without the need for manual tuning. With a fault-tolerant control system, a hexacopter or octocopter can land safely even in the event of propulsion system failure.
Industry Solutions and SDK Compatibility
The A3 series provides industry solutions with D-RTK GNSS, smart ESCs, and Lightbridge 2. With Onboard and Mobile SDKs, custom-built applications can access flight data, and control the aircraft, gimbal, and camera. Dedicated hardware interfaces including CAN and API ports allow industry experts to craft their ideal aerial system by adding actuators and sensors.
Next-generation DJI Assistant
The brand new DJI Assistant 2 is powerful yet simple, making it easy to set up a variety of DJI aerial systems. A new, built-in flight simulator ensures that complex moves can be practiced in advance without risking the aircraft, and a completely overhauled Ground Station supports touch screen interaction, offline mission design, route planning and even formation flight for multiple aircraft.
General
Size:
Controller: 64mm x 42mm x 19.5mm
PMU: 51mm x 34mm x 13.5mm
External IMU: 34mm x 26.5mm x 20mm
GPS-Compass Pro: 61mm (diameter) x 13mm
LED: 27mm x 27mm x 8mm
Built-in Functions:
Built-in PMU
Intelligent Flight Modes
Low voltage protection
DJI Smart Battery Protection
Motor overload detection
External SBUS receiver
Lightbridge 2 receiver
8 function channels (including 4 configurable direction channels)
SDK
Flight Performance
Maximum Wing Resistance: <10m/s
Max Yaw Angular Velocity: 150 deg/s
Max Tilt Angle: 35o
Ascent/Descent:
Ascent: 5m/s
Descent: 4m/s
SDK
SDK:
Mobile SDK
Onboard SDK
SDK Port: API/CAN2
Hovering Performance
Hovering Accuracy:
Vertical: 0.5m
Horizontal: 1.5m
D-RTK GNSS:
Vertical: 0.02m + 1ppm
Horizontal: 0.01m + 1ppm
Peripheral
Supported Multi-rotor:
Quadcopter: I4,X4
Hexacopter: I6, X6, Y6, IY6
Octocopter: X8, I8, V8
Supported ESC: 400Hz frequency
Recommended Battery: 3S to 12S LiPo
Assistant Software System Requirement:
Windows 7 /8 /10 (32 or 64 bit)
Mac OS
Recommended Radio: Lightbridge 2, S-BUS or D-BUS
Other DJI Products Supported: Z15, Ronin-MX, S900, S1000, S1000+,iOSD, D-RTK, DATALINK PRO etc.
Operating Temperature: -10oC to +45oC
Protection
Motor Fail Protection: Minimum 6 axis
Propulsion Protection: Motor Overload
No Fly Zones: Supported
Low Battery Level Warning (only for DJI Intelligent Flight Battery): Smart RTH
Low Battery Voltage Warning: Supported
Item Dimension (L"xW"xH")
8 x 6 x 3
Weight
1.5 lbs
Warranty Information
1 Year
Combining ultimate reliability with accurate flight control, the brand-new A3 series of flight controllers is ideal for demanding industrial and cinematic applications where reliability and customization are essential.
Triple Modular Redundancy
The A3 Pro is equipped with three IMUs and three GNSS units, with additional analytical redundancies for a total of six redundancies. Working together with advanced diagnostic algorithms, if the A3 Pro detects GNSS or IMU unit failure during flight, it seamlessly switches to another unit to maintain reliability and precision.
(Upgrade the A3 to A3 Pro by installing 2 upgrade kits.)
Precision Fault-Tolerant Control
The new attitude determination and multi-sensor fusion algorithms improve the A3s control accuracy. The robust control algorithm enables the A3 and A3 Pro to be adapted to a wide range of aircraft without the need for manual tuning. With a fault-tolerant control system, a hexacopter or octocopter can land safely even in the event of propulsion system failure.
Industry Solutions and SDK Compatibility
The A3 series provides industry solutions with D-RTK GNSS, smart ESCs, and Lightbridge 2. With Onboard and Mobile SDKs, custom-built applications can access flight data, and control the aircraft, gimbal, and camera. Dedicated hardware interfaces including CAN and API ports allow industry experts to craft their ideal aerial system by adding actuators and sensors.
Next-generation DJI Assistant
The brand new DJI Assistant 2 is powerful yet simple, making it easy to set up a variety of DJI aerial systems. A new, built-in flight simulator ensures that complex moves can be practiced in advance without risking the aircraft, and a completely overhauled Ground Station supports touch screen interaction, offline mission design, route planning and even formation flight for multiple aircraft.
General
Size:
Controller: 64mm x 42mm x 19.5mm
PMU: 51mm x 34mm x 13.5mm
External IMU: 34mm x 26.5mm x 20mm
GPS-Compass Pro: 61mm (diameter) x 13mm
LED: 27mm x 27mm x 8mm
Built-in Functions:
Built-in PMU
Intelligent Flight Modes
Low voltage protection
DJI Smart Battery Protection
Motor overload detection
External SBUS receiver
Lightbridge 2 receiver
8 function channels (including 4 configurable direction channels)
SDK
Flight Performance
Maximum Wing Resistance: <10m/s
Max Yaw Angular Velocity: 150 deg/s
Max Tilt Angle: 35o
Ascent/Descent:
Ascent: 5m/s
Descent: 4m/s
SDK
SDK:
Mobile SDK
Onboard SDK
SDK Port: API/CAN2
Hovering Performance
Hovering Accuracy:
Vertical: 0.5m
Horizontal: 1.5m
D-RTK GNSS:
Vertical: 0.02m + 1ppm
Horizontal: 0.01m + 1ppm
Peripheral
Supported Multi-rotor:
Quadcopter: I4,X4
Hexacopter: I6, X6, Y6, IY6
Octocopter: X8, I8, V8
Supported ESC: 400Hz frequency
Recommended Battery: 3S to 12S LiPo
Assistant Software System Requirement:
Windows 7 /8 /10 (32 or 64 bit)
Mac OS
Recommended Radio: Lightbridge 2, S-BUS or D-BUS
Other DJI Products Supported: Z15, Ronin-MX, S900, S1000, S1000+,iOSD, D-RTK, DATALINK PRO etc.
Operating Temperature: -10oC to +45oC
Protection
Motor Fail Protection: Minimum 6 axis
Propulsion Protection: Motor Overload
No Fly Zones: Supported
Low Battery Level Warning (only for DJI Intelligent Flight Battery): Smart RTH
Low Battery Voltage Warning: Supported
Item Dimension (L"xW"xH")
8 x 6 x 3
Weight
1.5 lbs
Warranty Information
1 Year
