APC Power Distribution Unit AP8981 Rack Power Distribution Unit 2GB Switched ZeroU 11kW 230V C13-C19 Retail
APC Power Distribution Unit AP8981 Rack Power Distribution Unit 2GB Switched ZeroU 11kW 230V C13/C19 Retail
AP8981Features
Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Includes : Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cable
Switched Rack PDU Features & Benefits
Remote Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Remote Individual Outlet Control:
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Output
Nominal Output Voltage:208V , 230V
Overload Protection:No
Output Connections
(21) IEC 320 C13 (Battery Backup)
(3) IEC 320 C19 (Battery Backup)
Input
Nominal Input Voltage:400V 3PH
Input frequency:50/60 Hz
Input Connections:IEC 309 16A 3P+N+PE, IEC 309 20A 3P+N+E
Cord Length:6ft ( 1.83meters )
Number of Power Cords:1
Maximum Input Current:16A
Maximum Line Current:16A
Regulatory Derated Input Current (North America):16A
Conformance
Approvals cUL Listed, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, UL Listed, VDE
Sustainable Offer Status
RoHS: Compliant
AP8981Features
Rack PDU 2G, Switched, ZeroU, 11kW, 230V, (21) C13 & (3) C19
APC Switched Rack Power Distribution Units (PDUs) enable advanced, user-customizable power control and active monitoring. Remote outlet level controls allow power on/off functionality for power recycling to remotely reboot equipment and restrict unauthorized use of individual outlets. Power sequencing delays allow users to define the order in which to power up or down attached equipment. Avoid circuit overload during power recovery and extend uptime of critical equipment by prioritizing the load shedding. Current metering provides real-time remote monitoring of connected loads. Switched Rack PDUs include real power monitoring, a temperature/humidity sensor port, locking IEC receptacles, and low profile circuit breakers. User-defined alarms warn of potential circuit overloads before critical IT failures occur. Users can access, configure, and control Switched Rack PDUs through secure Web, SNMP, or Telnet Interfaces and is complimented by APC Centralized Management platforms using InfraStruxure Central, Capacity Manager and Change Manager.
Includes : Installation guide , Rack Mounting brackets , Safety guide , Serial configuration cable
Switched Rack PDU Features & Benefits
Remote Management Capabilities:
Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements.
Remote Individual Outlet Control:
Remotely manage outlets so users can turn outlets off that are not in use (prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment).
Output
Nominal Output Voltage:208V , 230V
Overload Protection:No
Output Connections
(21) IEC 320 C13 (Battery Backup)
(3) IEC 320 C19 (Battery Backup)
Input
Nominal Input Voltage:400V 3PH
Input frequency:50/60 Hz
Input Connections:IEC 309 16A 3P+N+PE, IEC 309 20A 3P+N+E
Cord Length:6ft ( 1.83meters )
Number of Power Cords:1
Maximum Input Current:16A
Maximum Line Current:16A
Regulatory Derated Input Current (North America):16A
Conformance
Approvals cUL Listed, EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, FCC Part 15 Class A, ICES-003, UL Listed, VDE
Sustainable Offer Status
RoHS: Compliant
